Ensure the red wire (VCC/5V) aligns with Pin 1 and Pin 2 on the header block to avoid damaging connected USB devices. 5. Clear CMOS Jumper Settings
Enter BIOS → Load Optimized Defaults → F10 save.
Intel G41 Express (Northbridge) + ICH7 (Southbridge). acer g41tam rev 10 manual extra quality
Reset Switch (RESET_SW). Orientation does not matter.
This motherboard supports Intel processors built on a 45nm or 65nm process. It handles Front Side Bus (FSB) speeds of 800, 1063, and 1333 MHz. Q9000, Q8000 series. Intel Core 2 Duo: E8000, E7000 series. Intel Pentium Dual-Core: E5000, E6000 series. Intel Celeron: E3000, 400 series. Ensure the red wire (VCC/5V) aligns with Pin
Hard Drive Activity LED (HD_LED). Pin 1 is Positive (+). Pins 2 & 4: Power LED (P_LED). Pin 2 is Positive (+).
What or error message you are experiencing (if any)? Intel G41 Express (Northbridge) + ICH7 (Southbridge)
8GB [Depending on BIOS, usually 4GB per slot]. Driver & Manual Support
: Provides four SATA 3.0 Gb/s connectors and often a single IDE connector for legacy drives.
Connecting case wires to the motherboard front panel header can be challenging without a manual. Use this standard Acer 14-pin layout to guide your connections: