Extract the ZIP folder to a dedicated directory on your local drive (e.g., C:\ACHI_IR_Soft ).

For detailed setup instructions and safety warnings, you can refer to the ACHI IR6500 User Manual provided by Bulcomp-Eng . #95 | IR6500 Rework Station Software (PC410 Controller)

Connect the RS232/serial cable to the back of the ACHI IR6500.

Ensure your serial port communication settings (as shown in Device Manager) match the controller's settings. Users have reported success with the following configuration:

The Achi IR6500 typically communicates with a PC via a USB-to-RS232 (Serial) bridge. Depending on your specific model and controller, you generally have two main software paths: 1. The Standard Manufacturer Software (Pcxm / Solder007)

Depending on the exact version of your machine, you will likely use one of two programs:

Plug the USB cable from the Achi IR6500 into your PC and power on the machine.

Right-click the executable file ( IR6500.exe or PC410.exe ) and select .

In the ACHI IR6500 community, the PSoft software is widely discussed. Users in forums often mention using PSoft as an alternative or successor to the original software. It functions similarly, allowing users to drive the bottom heater and create temperature profiles.