Adjustment Program Epson L14150 New Info

If the red lights continue to blink after a reset, you may need to physically inspect the maintenance box to prevent ink overflow.

You cannot perform a reset over Wi-Fi or a network cable. Connect the printer directly to your PC using a high-quality USB cable.

A confirmation pop-up will ask for permission to clear the counter. Click . Step 5: Finalize the Reset adjustment program epson l14150 new

| | Available | |---------------------------------------------|----------------| | Read printer status and ink levels | ✅ Yes | | Read diagnostic report from the printer | ✅ Yes | | Printhead cleaning | ✅ Yes | | Run ink charging routine | ✅ Yes | | Paper pass test | ✅ Yes | | Paper feed test | ✅ Yes | | Nozzle test | ✅ Yes | | Read / Write printer serial number | ✅ Yes | | Read / Write printhead identifier | ✅ Yes | | Read / Write printer EEPROM settings | ✅ Yes | | Reset the platen pad counter | ✅ Yes |

To reset your printer's waste ink counter, follow these steps: Preparation: Connect your printer via If the red lights continue to blink after

– Turn off the printer, wait 10 seconds, and then turn it back on. The “Service Required” error should be cleared and normal printing can resume.

If you get a communication error, ensure the USB cable is securely connected, turn the printer off and on, and restart the software. A confirmation pop-up will ask for permission to

Scroll down to the Maintenance section, click on , and click OK . Step 7: Check the Current Counter Value