Must be designed so that the clamping force increases proportionally with the weight of the load. They must prevent the load from slipping if it tilts up to 10 degrees from its intended position.
In layman’s terms: If you have a crane hook, a magnet, a vacuum lifter, a grab, or a spreader beam that isn't permanently welded to the crane, this document dictates whether it is safe to use. It covers everything from the proof of structural capacity to the operational safety checks.
The material handling and lifting industry demands rigorous safety standards to prevent workplace accidents and equipment failure. Central to these regulations in Europe is the standard. This comprehensive standard specifies the safety requirements for non-fixed load lifting attachments, ensuring they are designed, manufactured, and tested to withstand operational stresses safely.
Standards evolve. The latest version is , which has replaced the 2022 edition. This significant revision reflects advancements in technology and lessons learned from incident investigations. din en 13155 pdf exclusive
Lifting mechanisms must feature safety devices that prevent the load from slipping or dropping. For instance:
No. Standard chain, wire rope, and textile slings are covered under separate standards (such as EN 818, EN 13414, and EN 1492). DIN EN 13155 specifically targets the structural mechanisms attached to those slings or directly to the crane hook. How often should proof load testing be repeated?
The primary purpose of DIN EN 13155 is to minimize risks during lifting operations, such as the accidental release of a load or structural failure of the attachment. The standard outlines explicit criteria for several critical design factors: 1. Mechanical Strength and Load Factor Must be designed so that the clamping force
The latest version, , incorporates major updates from the 2020 revision and the 2025 amendment (A1), specifically targeting mechanical safety and verification methods. Scope of DIN EN 13155
According to Clause 9, every attachment must have an indent number, WLL (Working Load Limit), and an expiry date for magnets. Use your PDF to verify the font size and location of markings.
Must feature indicator lamps showing the magnetization status and interlocks that prevent accidental de-energization while the load is suspended. 4. Marking and Documentation It covers everything from the proof of structural
Understanding the revision history is essential for knowing which version applies to your equipment:
With the phrase "pdf exclusive" being used by spam sites, here is a forensic checklist to validate your file before you pay.
Functional testing to ensure safety interlocks, indicators, and controls operate as intended. Individual Verification