Commands !!top!! — Ericsson Mini Link Cli

: Lists all current system faults or warning indicators. Network & VLAN Settings

:

show interface ethernet : Displays the port speed, duplex mode, and link status of physical Ethernet interfaces. 5. Diagnostics, Alarms & Troubleshooting ericsson mini link cli commands

show / get : Displays status, configurations, and operational parameters.

Configuration involves defining the sync sources, setting their priorities, and selecting the operational mode for interfaces that will carry timing information. : Lists all current system faults or warning indicators

Activates internal software loopbacks. If a local loopback clears errors, the issue lies further down the path (e.g., the remote node or the physical medium). Restarting Services and Units reload unit [unit-slot] reload system Use code with caution.

What are you trying to accomplish? (e.g., provisioning a new link, setting up VLANs, troubleshooting a drop) Are you encountering any specific error messages ? Diagnostics, Alarms & Troubleshooting show / get :

These are vital for diagnosing and resolving network issues.

set radio-link loopback far-end — Commands the remote ODU to loop back the received RF signal.

copy running-config startup-config (Or write memory ). Reload System: reload (Reboots the MINI-LINK node).