Fagor Fi80 Dishwasher Manual -

The FI80 uses a clear control panel layout, which varies slightly between model versions.

: For many error codes, performing a simple reset can clear the fault. Turn off the appliance, unplug it for at least 60 seconds, then plug it back in and turn it on again. If the error persists, it likely indicates a hardware issue that requires professional attention.

: Before turning the machine on, ensure the filter and scrap trays are clean and properly seated. Filling and Heating fagor fi80 dishwasher manual

Unscrew the upper and lower wash arms, as well as the upper and lower rinse arms.

What is the listed on your data plate (e.g., FI-80, FI-80-B, FI-80-DD)? The FI80 uses a clear control panel layout,

Heavy-gauge wiring must route through a strain relief into the main terminal block. This must comply with local electrical codes.

Before calling a certified commercial kitchen technician, check these common fault points to save on repair costs. Potential Cause Actionable Solution No power supply or tripped breaker If the error persists, it likely indicates a

Overflow tube missing; Clogged pressure switch tube; Defective water inlet valve.

Adjust the rinse aid screw clockwise if glasses show water spots. Turn it counterclockwise if glasses show bluish streaks or film, which indicates excessive chemical usage.

Clean the wash arms; verify the chemical pump operation; check the heater status.