Hks-va028-v2.0 _hot_ Jun 2026

Thank you for choosing the "hks-va028-v2.0." With proper installation, operation, and maintenance, this device will provide reliable and efficient performance. If you have any questions or need further assistance, please do not hesitate to contact us.

Based on its classification alongside similar modules like the DSN-VC288 , the typical operating parameters include: : 0–100V DC.

Installing the HKS-VA028-V2.0 is a relatively straightforward process that can be completed in a few hours. Here are the general steps: hks-va028-v2.0

Voltage measurement wire (connect to the positive of the source you want to measure). Thick Wire Harness (Current Measurement): Thick Red/Blue: Connect to the negative side of the load.

Most V2.0 models have small potentiometers on the back to fine-tune voltage and current readings if they seem slightly off. 4. Common Troubleshooting No Display: Thank you for choosing the "hks-va028-v2

The HKS-VA028-V2.0 uses a 50mm valve. If your manifold has a 44mm flange (common on Tial MVR), you will require an adapter plate.

0.28-inch dual-color LED (typically Red for Voltage, Blue for Current) AliExpress Refresh Rate: ~300ms to 500ms AliExpress Mounting Cutout: 45.5mm x 26.5mm daroghawala.org 2. Wiring Guide Installing the HKS-VA028-V2

Configuration A: Shared Single-Source Wiring (For targets under 30V)