Follow these steps to ensure a clean installation on Windows 10 or Windows 11. Step 1: Download the Official Driver
Hytera provides separate 32-bit and 64-bit driver installers. Version Matching:
If you see a yellow exclamation mark next to the device name, the driver did not install correctly. How to Match Drivers with Programming Cables hytera usb driver
A: Check your baud rate. Go to Device Manager → COM Port Properties → Port Settings → Bits per second must match the CPS (usually 115200 or 19200). Also, disable any Bluetooth serial services that might conflict.
The safest method is to download the driver directly from the official Hytera Partner Portal or request it from your radio vendor. Follow these steps to ensure a clean installation
Right-click the Windows Start menu and select .
After rebooting, connect your programming cable to the USB port. How to Match Drivers with Programming Cables A:
Expand Network adapters . You should see Hytera USB Radio or a similar virtual network interface.
If your computer detects the radio as a network adapter but shows "Unidentified Network - No Internet Access," the CPS may fail to read the radio data.