Leica Tcr805 Total Station User Manual Work -

Press . The instrument will measure the distance, compute the Easting ( ), Northing ( ), and Elevation ( ), and immediately save the data point to memory. Stakeout (Setting Out Points) Go to Programs > Stakeout .

Adjust the tripod legs to center the plummet mark directly over the ground nail/tack. Step 3: Leveling the Circular Bubble

Internal memory capable of storing up to 10,000 data blocks. Keyboard and Functional Keys leica tcr805 total station user manual work

Before capturing data, you must configure the internal software environment. Creating a New Job From the main menu, select (F3) and choose Jobs . Select New (F1).

, and a balance of precision and ease of use that makes it a "workhorse" for on-site tasks. Core Specifications 5-second angular accuracy and distance precision of in fine mode. Adjust the tripod legs to center the plummet

Match the COM port settings on your PC to the total station defaults: Baud Rate: 19200 (typically) Data Bits: 8 Stop Bits: 1 Parity: None

| User Role | Core Tasks | Linked Sections | |-----------|------------|------------------| | | Traverse, stakeout, topographic data collection | Ch. 4 (Measurements), Ch. 7 (Stakeout), Ch. 9 (Data recording) | | Site engineer | Layout, alignment, area calculation | Ch. 6 (Layout), Ch. 10 (COGO), Appendix C (Area calc) | | Technician | Calibration, fault finding, data transfer | Ch. 12 (Checks & adjustments), Ch. 14 (Troubleshooting), Ch. 13 (Data comms) | Creating a New Job From the main menu,

Connect the instrument to a computer using a Leica GEV102 serial-to-USB cable.

: Charge GEB111 or GEB121 NiMH batteries fully before heading into the field. Cold weather reduces capacity.

Adjust the tripod legs to a comfortable chest height. Ensure the tripod head is visibly level over your ground point. Stamp the tripod shoes firmly into the ground.

Turn two of the tribrach footscrews simultaneously in opposite directions to center the electronic bubble along the X-axis. Turn the third footscrew to center the bubble along the Y-axis.