Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Work !!install!! 〈2025〉
Centrally align the rail above the door and fix the omega brackets (8) to the ceiling.
A perfectly leveled ceiling mount prevents uneven belt or chain wear and eliminates mechanical friction.
To be used only during blackouts or system failures. Centrally align the rail above the door and
over joints to connect separate rail pieces.
: Close the garage door fully. Use a measuring tape to find the absolute center of the door panel width. Trace this horizontal midline up onto the lintel wall above the door and along the ceiling. over joints to connect separate rail pieces
| Step | Action | |------|--------| | 1 | Verify that the installation area has adequate space for maintenance and manual release operations | | 2 | Check total dimensions (refer to manual diagrams) | | 3 | Confirm door type compatibility (sectional or up-and-over) | | 4 | For up-and-over doors, ensure APRB curved oscillating arm is available | | 5 | Assess door balance – the door must be perfectly balanced for proper operation | | 6 | Verify that the runner length is appropriate for door height |
Page 1 — Cover & Table of Contents
Page 4. PR 70-07 INSTALLATION. CLOSING MECHANICAL STOP. DRIVE CARRIAGE. OPENING MECHANICAL STOP. PRC/PRB. PR 70-07. RELEASE LEVER. montaza.lv probo pr70 pr70-dl
| Parameter | Value (PR70-07 / PR70-DL) | |-----------|---------------------------| | Mains power supply | 230 Vac 50 Hz | | Motor power supply | 24 V dc | | Max. power input | 260 W | | Max. input current | 8.5 A | | Input power to line (230V) | 1.2 A | | Thrust | 650 N | | Lubrication | Grease | | Encoder | Yes (built-in) | | Speed | 0.10 – 0.18 m/s | | Work cycles | 50% | | Nominal work time | 13 min | | Courtesy light | 24 Vdc (internal) | | Operating temperature | -20°C to +70°C | | Protection class | IP20 | | Motor insulation class | F | | Assembly | Horizontal ceiling-mounted on dedicated runner | | Dimensions (L×W×H) | 442 × 213 × 142 mm | | Weight | 6.7 kg | | Max leaf surface area | 11.5 m² | | Maximum door width | 5 m (for perfectly balanced doors) | Trace this horizontal midline up onto the lintel
