: These are the raw floppy disk images for MS-DOS 6.22 Setup Disks 1, 2, and 3. 2. Create the Virtual Machine Open VirtualBox and click New . Name : Give it a name like "MS-DOS 6.22". Type : Select Other . Version : Select DOS .
Now that you've created a virtual machine, you'll need to configure it to use the MS-DOS 6.22 IMG file. Here's how:
Sometimes you want to add custom software (like Turbo C, a game, or Norton Commander ). You don’t need real floppies. On a modern PC, you can create .img files using: ms dos 622 img files works with virtual box top
Once the final files are copied, the installer asks to remove all disks. Disconnect the virtual floppy from the storage settings and reboot. The machine will roar to life with the iconic C:\> prompt, signaling that the digital time machine is ready for use. 1 on top of this DOS setup? MS-DOS 6.22 - Installation in Virtualbox
With the first floppy disk mounted, you are ready to boot the machine and partition the virtual hard drive. Click to launch the virtual machine. : These are the raw floppy disk images for MS-DOS 6
: To make the system truly usable, you may want to search for and install VIDE-CDD.SYS (CD-ROM) and CTMOUSE.EXE (CuteMouse) for mouse support. Making Files Available To DOS 6.22 VM - virtualbox.org
→ The hard disk isn't partitioned/formatted. Boot from Disk 1 and run fdisk , then reboot and format c: /s . Name : Give it a name like "MS-DOS 6
With the machine built, the installation moves to the settings:
Getting MS-DOS to run is only the first step. To make it usable, several configuration steps are required:
Go to Settings -> Storage. Click on the Floppy Controller and add Disk1.img to the virtual floppy drive.