, you will need to use a PC to transfer the update file via USB. This process typically resets the device, meaning you will need to re-upload your satellite and transponder (TP) lists afterward.
Click "Next" to begin. Wait for the progress bar to reach 100%. Do not disconnect the cable during this time.
Click "Write" to transfer the new TP list to the meter. How to Check Your Current Firmware Version To check if your update was successful: Turn on the WS-6933. Press the MENU button. Navigate to System or Tools > Information . satlink ws-6933 software update
Once complete, turn the device off and back on. You can verify the new version in the System Setup menu.
Updating your ensures your gear stays relevant in an ever-changing satellite landscape. Keep your battery charged, use the right files, and you'll be back to aligning dishes in minutes! , you will need to use a PC
New software typically includes the most recent TP lists, saving you the manual work of entering new frequencies for specific satellites. Bug Fixes:
The device must be in a specific state to receive new software: Turn the device . Press and hold the "Return" button. While holding "Return," flip the power switch to ON . Wait for the progress bar to reach 100%
You need to download a zip file containing three essential items from a trusted satellite forum or the official manufacturer archive:
A .bin or .ssu file specifically designed for the WS-6933 model. Step-by-Step Update Instructions 1. Download the Correct Firmware
