Satlink Ws-6979 Software Upgrade [verified]

Set the Upgrade Mode to or Software depending on the menu prompts.

Upgrading the software (firmware) on your Satlink WS-6979 is a straightforward process typically performed via the device's USB port

Satellite providers often change transponder frequencies, modulation types (QPSK/8PSK), or symbol rates. An upgrade ensures your device recognizes these changes. Satlink Ws-6979 Software Upgrade

Ensure the 7.4V/3000mAh battery is at least 50% charged or connect the device to the DC Adaptor to prevent a power-off during the process, which can "brick" the meter. Step-by-Step USB Upgrade Procedure Most modern Satlink combo meters, including the , support upgrading directly via the onboard USB port.

As one Polish forum user discovered in 2022, a newer version of the WS-6979 might have an upgraded processor to support HEVC, but this cannot be added to older units with a simple firmware update. The hardware inside the device is fixed; a software update changes the instructions, not the physical components. Set the Upgrade Mode to or Software depending

variant) is a critical maintenance step to ensure compatibility with modern transmission standards like and to improve signal locking sensitivity . Upgrade Prerequisites Before beginning, ensure you have the following: USB Flash Drive: Formatted to FAT32 .

Insert the prepared USB flash drive into the USB port located on the side of the meter. Power on the device. Step 3: Navigate the System Menu Press the button on the keypad. Ensure the 7

Select the .bin file displayed on the screen. Press to begin the upgrade. A progress bar will appear. Do not touch the buttons or disconnect the power during this process.

firmware. Ensure the version you download is specifically designed for your model, as flashing incorrect firmware can make the device unusable. 2. Install the USB Serial Driver

usually requires a specialized USB-to-Serial cable to connect to a PC.