Click , then click Diagnostics to test the connection against an active PLC node. 6. Troubleshooting Common Issues on Windows XP Issue 1: "Device Cannot Start (Code 10)" in Device Manager
Once the software installation prompts a system reboot, restart the PC. After logging in, plug the Siemens PC Adapter USB A2 into a physical USB 2.0 port. Step 3: Complete the Found New Hardware Wizard
If running Windows XP inside a virtual machine (like VMware Workstation or VirtualBox) on a modern Windows 10/11 host, ensure that the host recognizes the USB A2 device first, and then explicitly pass the USB device filtering through to the Windows XP guest operating system. To help provide more specific information, let me know:
Look at the physical LEDs on the PC Adapter USB A2. The Power LED should be solid green. If the Activity or MPI/DP LEDs are blinking red or entirely off when connected to a live PLC, check your MPI/PROFIBUS cable connection. The adapter requires the PLC side to be active to establish bus synchronization.
The (6GK1571-0BA00-0AA0) is compatible with Windows XP Professional SP2 or higher . Drivers for this hardware are typically bundled with Siemens engineering software like STEP 7 or TIA Portal , but they can also be installed manually via a dedicated driver disk . Driver Installation Methods
The safest and most reliable source for the driver is the original installation disk that shipped with your Step 7 software or the adapter itself. Look for a folder named Drivers or SIMATIC_NET on the disc. 2. Siemens Industry Online Support (SIOS)
The is configured to PC Adapter USB A2 (MPI, PROFIBUS, or Auto).
