If you want to move forward with configuring your setup, tell me: The exact you are using
Place these in your EFI/OC/Kexts folder and add them to config.plist :
The UHD 770 uses the Intel Xe-LP graphics architecture—a completely different generation than anything Apple ever supported. Since Apple stopped developing macOS drivers for Intel iGPUs after Comet Lake, the UHD 770 simply has no driver support in macOS, regardless of whether you’re running Catalina, Monterey, Ventura, Sonoma, or the latest Sequoia. uhd 770 hackintosh new
The core issue is that Apple never released a Mac equipped with an Intel 12th Gen processor or newer. Consequently, macOS lacks the drivers
Good luck, and welcome to the last generation of Hackintosh. Make the UHD 770 proud. If you want to move forward with configuring
Building a Hackintosh on modern Intel hardware like and Raptor Lake (13th/14th Gen) is entirely possible, but the status of the Intel UHD 770 integrated graphics remains the most significant hurdle. Because Apple transitioned to its own Silicon (M1/M2/M3 chips) before these Intel architectures were released, macOS contains no native drivers for the UHD 770 or its Xe-based architecture. The Current State of UHD 770 on Hackintosh (2024-2025)
Because Apple transitioned completely to its proprietary Apple Silicon (M-series) chips after Intel's 10th Generation Ice Lake and Comet Lake processors, macOS lacks native display drivers for the Intel Xe architecture that powers the UHD 770. Consequently, macOS lacks the drivers Good luck, and
Users are increasingly using the UHD 770 for hardware transcoding in Linux/Proxmox environments for media servers (like Plex or Jellyfin), where it performs excellently, even while the "host" runs macOS without iGPU support. 12th Gen Intel UHD 770 (Alder Lake) iGPU support - TrueNAS
I can guide you through generating the correct OpenCore config.plist patches and drivers.
The framebuffer is sending signal through the wrong port. Fix: Boot with -igfxonln=1 boot-arg. If that works, manually map your ports using hackintool .