The series includes pressurized water temperature control units (TCUs) designed for high-performance molding applications . While "360" isn't a standard model number (the series typically ranges from D90 to D180 ), users often seek information on high-temperature pressurized units or specific technical manuals for advanced setups. 🛠️ Key Technical Specifications
The target temperature for the mold.
Inspect solid-state relays and terminal blocks for signs of thermal discoloration or loosening due to thermal cycling. Semi-Annual / Annual Maintenance
The Tempro plus D series employs a smaller, highly efficient heat exchanger that significantly reduces the volume of circulating water. This design results in two major advantages: drastically shorter pre-heating times (getting the mold up to production temperature faster) and faster cool-down periods (reducing cycle time and downtime for mold changes). Direct cooling is available as a standard feature for maximum cooling capacity when required. wittmann tempro plus d 360 manual exclusive
Allow the unit to cool down completely via its indirect cooling loop.
Indicates a leak in the external process loop or oil consumption. Check external lines, top off with approved synthetic oil, and restart.
Do you need help finding the for this unit? Inspect solid-state relays and terminal blocks for signs
Pressurized water (requires specialized closed-loop conditioning)
The Wittmann Tempro Plus D 360 Manual Exclusive is a versatile, manual defibrillator-monitor designed for emergency medical services, hospitals, and healthcare professionals. This device provides advanced cardiac life support, including manual defibrillation, cardioversion, and pacing.
The Tempro Plus D 360 is not a standard temperature control unit (TCU). Because water flashes to steam well before reaching 360°C, this system operates under extreme pressure to keep water in a liquid state. Core Mechanical Parameters 360°C (680°F) Direct cooling is available as a standard feature
Displays the target temperature alongside the real-time process water temperature.
0.5 kW (4.5–5 bar) standard; up to 1.1 kW (9 bar) enhanced Indirect cooling (standard) or direct cooling (optional) Interface 5.7" TFT color touch-screen with Windows CE 🌟 Exclusive Manual Features & Settings
Always use synthetic oil with a flash point and boiling point well above the 360°C threshold. Operating near or above an oil’s flash point presents a severe fire hazard. 2. Installation and Pre-Operational Setup
Improper installation of a high-temperature TCU can result in catastrophic equipment failure or severe steam burns. Follow these steps precisely. Plumbing Connections
Select a cooling mode (e.g., or "Cool Safety Temp" ).