Xtool Upgrade Tool V2.0.57 [DIRECT WORKFLOW]

Launch the tool, connect a device, and hold Ctrl + Shift + D before clicking “Device Info.” A hidden diagnostics panel appears, showing raw temperature sensor readings from the laser diode case and the number of emergency stop cycles logged. This isn’t documented anywhere—discovered purely by a curious user on r/xTool.

Do not confuse the tool version with the firmware version. v2.0.57 is the tool that installs firmware like v3.12.7.

Resolving issues like connection instability, laser errors, or calibration failures. xtool upgrade tool v2.0.57

The tool features a more robust handshake routine to correctly identify machines stuck in bootloader mode.

Have you encountered any issues with v2.0.57? Let us know in the comments (on the original blog post). Safe lasering! Launch the tool, connect a device, and hold

Ensure your laptop is plugged into a power source or that your desktop computer is connected to an uninterrupted power supply (UPS). A power failure during a firmware flash can corrupt the control board. Phase 2: Establishing the Physical Connection

Keep this tool in your “Laser Tools” folder—you’ll likely need it every few months. Have you encountered any issues with v2

Why? Industry insiders suggest this is a direct response to third-party modifications (e.g., unlocking the P2’s 55W CO2 tube to run at 60W, or bypassing material recognition on the S1). For xTool, it’s about safety and warranty control. For hackers and tinkerers, it’s a digital wall going up.

Run the installer as an Administrator. The package automatically installs the necessary CH340/CH341 serial drivers required for your PC to communicate with the xTool motherboard via USB.