Typical usage steps:
I can provide tailored network configuration steps or the exact port requirements for your specific software ecosystem. Share public link
Ensure the ZKTeco device (time attendance/access terminal) is powered on and connected to the PC or network switch via an Ethernet cable. 3. Run the IP Scanner Open the Tool: Run the "Communication Setting Tool."
Ensure the LAN cable is securely plugged in and the link lights are active on the device. zkteco ip scanner
: It sends a broadcast packet across the network to trigger a response from any connected ZKTeco mainboards.
By default, it will launch the portal at and automatically open it in your default browser.
This is the standard standalone utility used by installers to search for ZKTeco hardware across a network subnet. Typical usage steps: I can provide tailored network
ZKTeco does not always package the IP scanner as a standalone installer. It is usually embedded within larger software suites like ZKAccess 3.5, ZKBioSecurity, or the legacy ZKTime 8.0.
Network administrators and security installers frequently face the challenge of locating, configuring, and managing biometric terminals, access control panels, and IP cameras across complex networks. In large-scale deployments, manually tracking down every device's IP address can become a logistical nightmare.
Ensure your computer and all target ZKTeco devices are physically connected to the same network switch or router. For initial setup, connecting your PC directly to the device's network port can be an effective alternative for troubleshooting. Run the IP Scanner Open the Tool: Run
These attendance management solutions contain identical search utilities within their device communication menus.
Confirms that the device is "reachable" before you attempt to sync it with management software like ZKBioSecurity or ZKTime.Net . When to Use It